Peaty’s tubeless bike rim tape, single, 9m roll


SKU: N/A Category:


Peaty’s tubeless bike rim tape, single, 9m roll

Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket, yet leaves a minimal mess when removed.

An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.

Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.

Our tape comes on 9meter and 50meter rolls in four different width options – 21mm, 25mm, 30mm and 35mm.

One 9 meter roll will cover approximately:

  • 5 x 26″ Rims
  • 4 x 27.5″ Rims
  • 4 x 29″ Rims
  • 4 x 700c Rims


  • Remove tyre and any old rim tape
  • Clean and degrease rim thoroughly (nobody likes a dirty rim!)
  • Ensure rim is completely dry before application
  • Starting at least 10cm before the valve hole, Press the tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
  • Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
  • Use a small spike to pierce the tape in the centre of the valve hole
  • Remove dust cap and push valve through the valve hole
  • Apply lock ring tightly by hand, ensuring there are no air gaps
  • Refit tyre, add Peaty’s Tubeless Sealant, inflate tyre
  • Ride!